A high selective bandpass filter used to
supress strong adjacent carrier interference, maintaining
superior group delay in CATV, LAN, headend and system
applications.
The BP-8720 has increased selectivity
making it suitable to suppress adjacent channel
interference and off air interference in CATV, LAN, SMATV
and MATV head end applications.
The Wide Bandpass filter is used to pass
selected groups of channels and reject the remainder of
the spectrum. CATV and SMATV tier packages for hotels and
apartments.
The WBP-9340 wide bandpass filter allows
signals between two customer specified 3 dB points
(knees) to be passed, anything outside this bandwidth
will be rejected.
The Band Rejection Filter is used to trap
a selected group of channels and pass the remainder to
the spectrum. CATV and SMATV tier packages for hotels,
motels and apartments. Model BRF-8745 is made up of Low
and Highpass Filters combined together to give any
desired band rejection bandwidth.
The DXP-9455 is a selective diplex filter
which provides customer specified 1 dB points that cross
over so the passband is removed from the filter knee
ensuring low group delay. The pass band has less than 1
dB ripple to 750 MHz.
The DXP-9655-D high performance filters
are used to separate or combine Sub VHF and VHF
frequencies. Designed for headend applications to launch
and/or combine upstream and downstream signals.
The lowpass filter passes all frequencies
from DC to prescribed frequency. All frequencies above
the prescribed frequency are suppressed with minimal
insertion loss introduced. CATV and SMATV tier packages
for hotels, motels and apartments.
The highpass Filter suppresses all
frequencies from DC to a prescribed frequency. All
frequencies above the prescribed frequency are passed
with minimal insertion loss introduced. CATV and SMATV
tier packages for hotels, motels and apartments.
Models BWL-9050 and BWH-9060 are extremely
sharp cutoff, low and highpass filters. Designed
primarily to uncombine a CATV cable feed to interface to
a fibre optics system or for reinserting a block of new
programming. Transition from knee to first channel to be
rejected is 1.5 MHz.
